Type To Search

Type To Search

CONSULTATION

Type To Search

Author: Admin2
Home Articles Posted by Admin2
Chemical and Biological War
27 JulAnalysisUPDATE

A Brief Review on Chemical Agent Resistant Coatings (CARC)

by Admin20 Comments

A special paint used to make metal surfaces highly resistant to corrosion and penetration of chemical agents. They are widely used in all kinds of equipment to protect them from heavy wear and tear; they are mainly known for their use in military and defense tech owing to the nature of their heavy use.

The Chemical Agent Resistant Coatings (CARC) have been in use for the past several decades, but recent advances in the chemical agent resistant coating technology have opened new doors of possibilities.

The Concept of CARCs

The main component of CARCs is either epoxy-based composition OR polyester-based composition. These specialized coatings are designed to shield the surfaces against potent biological and chemical agents and are commonly used in the Military, Air Force, and Marine Corps. 

 

The major CARCs market regions are North America, Europe, China, Japan, and South Korea. The application process of CARC includes:

  • Surface preparation methods
  • Pre-treatments
  • Primer
  • Top coating

The two types of CARC topcoats are:

Moisture-cure urethane  – CARCs made of Moisture-Cure Urethane (MCU) involves combining the isocyanate group with water in a two-stage process to yield a cured paint film. The coating protects from chemicals, sand, and windblown dust. MCU does not emit hazardous air pollutants and comes with a low VOC level. 

Water-reducible two-component polyurethane – Water-based CARCs offer high performance and are most used by the military. The coating is composed of water-based polyurethane resins eliminating the need for many solvents like xylene, toluene, etc.

The Need for CARCs

The defense forces are exposed to various arms, ammunitions, and extreme exposure conditions. It results in a high cost of maintaining, repairing, and decontaminating the vehicles and equipment. Also, the forces are exposed to extreme weather conditions. 

The need for advanced CARC intensified after Operation Desert Storm in the wake of advanced chemical and biological weapons. Moreover, corrosion is a prime concern in the US Marine Corps (USMC) due to the exposure of the vehicles to harsh conditions, including salty seawater.

The CARCs are used to protect vehicles, equipment, and infrastructure from chemical agents like mustard gas, nerve gas, etc., in combat zones. The coating provides a non-porous finish to the defense vehicles’ surface to shield against radioactive, biological, and chemical weapons. The hazardous elements form beads on the non-porous surface that can be easily washed away. The coating’s effectiveness lies in its chemical repellent or absorption prevention ability.

Advantages of CARCs

The advantages offered by CARC are: 

  • Offers chemical agent resistance and decontamination
  • Enhances the corrosion resistance of the surface  
  • Matches the IR signature as per the area of operation, thus hindering detection by enemy systems
  • Provides camouflage top coatings to reduce visibility in different terrains 
  • Renders UV resistance to the equipment
  • Lowers maintenance cost as the coating is long-lasting
  • Improves weather durability and scratch resistance
Disadvantages of CARCs

There are numerous benefits associated with CARCs but with some threats to human health and the environment, if not dealt with correctly. The key to the advantages of CARCs lies in the successful handling of the disadvantages.

The toxicity of CARCs posed a significant threat to Gulf War veterans. The inhalation of CARCs fumes while painting and drying could cause health hazards. The ARL has laid down safety measures while painting, welding, or working with wet CARCs. Dry CARCs do not cause any danger.

The emission of VOCs and hazardous chemicals in CARCs manufacture was a considerable concern until strict regulations were imposed on the VOC emission limit by the US government. Greener technologies are now being developed, keeping in mind the harmful effects of CARCs.  

Developments in CARC Technology

CARCs are used in the military since 1985 when the US Army Regulation 750-1 made it mandatory for all tactical equipment. In 2018, the US Army Research Laboratory (ARL) became the approving authority for all CARC products designed for the Department of Defence (DoD) and conducted numerous research in the field.

The US Marine Corps (USMC), in collaboration with Oak Ridge National Laboratory (ORNL), researched the Corrosion Prevention and Control Program (CPAC) on USMC tactical ground and ground support equipment to enhance their life as well as reduce the maintenance need and cost. Under the program, substantial progress was made that exhibited improved corrosion resistance by using Silica-based hydrophobic powder additives on military-grade CARC systems.

The CARC is also applied by the Government Contractors who supply parts and help maintain military vehicles like High-mobility Multipurpose Wheeled Vehicles (HMMWV), Light Armoured Vehicles (LAVs), containers, generators, and shelter exteriors.

From solvent-borne CARCs in the early 1980s to high-performance water reducible CARCs in 2000, the technology is being developed and applied for improving the protection of the expensive military vehicles without harming the environment.

The DoD has issued the following new specifications for vendors:

  • Type 1 Coating: CARCs with epoxy-based primer
  • Type 2 Coating: CARCs with epoxy-based primer for internal components 
  • Type 3 Coating: CARCs with camouflage top coatings
  • Type 4 Coating: CARCs for ammunition containers

The new environmental norms and safety concerns result in continuous research being conducted in the field, leading to new, better, and safer CARC technology. 

Conclusion

In brief, the CARCs, when applied in the correct procedure, offer reduced cost and improved protection for the military. The new technologies in CARCs hold the promise of increased durability with non-photocatalytic material. The technology could be successfully implemented in the industrial and commercial sector in the future on surfaces that are exposed to radiation or chemical toxins.

References:
Read More
bacteria
24 JulAnalysis

What is Difference Between Antimicrobial and Antibacterial Coatings?

by Admin20 Comments
Numerous products, including protective coatings, offer different types of protection, and the standard scientific terms used in those products often look interchangeably similar. For instance, many individuals may feel that the terms antibacterial and antimicrobial represent the same thing.

Introduction

The Covid-19 global pandemic has made the world become increasingly conscious of infectious microorganisms and their effect on public health.  Suddenly, everyone is conscious of the surfaces they touch or encounter, the crowds they get into, and much more.
It is in this context that the use of terms antibacterial and antimicrobial needs to be clarified and placed in context. The use of these terms has always been in terms of antibiotics and medicines; it has been less so in terms of preventing infections through the use of protective surfaces; with the exception being the use of disinfectants and cleaning products. Even there, the protection offered is transient and requires regular use of these products. There have been some pioneering approaches in this regard wherein the development of anti-fouling chemistries for uses elsewhere was envisioned to be applicable on public surfaces (Tiwari 2018). It is only of late, especially with the onset of the Covid-19 pandemic, that thoughts and approaches are being focused on developing INVESIL smart antimicrobial coatings (Case Studies – Flora …). 
Keeping this in mind the following write-up revisits the basics of Microbiology and places them in context with products being marketed. Some bit of background information is also worth looking into the nature and classification of products offering protection against infectious microorganisms. 

What does antibacterial mean?

Simply, anything that acts against bacteria is antibacterial. Bacteria are a subset of the world of microorganisms (microbes, in short) that surround us. These include viruses, algae, fungi, protists among others. Pathogenic bacteria (bacterial pathogens) cause infections and diseases when they enter the host, which could be a plant or animal. These bacteria, then multiply and manifest themselves as infections in the hosts they have entered into. Antibacterial agents are typically designed and used for protection against pathogenic and infectious bacteria (not the rest of the microbes). Antibacterial agents are designed to counter the growth of these bacteria. The mechanisms of the actions of these agents nay differ BUT they act to counter the growth and spread of bacteria in a body or any surface (Neu 1996).

 

Classification:

Nature of action
Antibacterials can be either Bacteriostatic OR Bactericidal. The term bacteriostatic refers to medications whose mechanism of action stalls bacterial cellular activity without directly causing bacterial death (Loree 2021). In other words, the former class of agents prevents the growth of bacteria or slows their growth substantially without actually killing them directly. In reality, the demarcation between the two categories is not so sharp and distinct i.e. one that exclusively kills bacteria and another that only inhibits growth (Pankey 2004).  The in vitro microbiological determination is more detailed and elaborate. This classification can be broadly applied to other agents that antifungals, antiparasitic, etc. It is a different matter, though, if there are agents that are exclusive to any of the categories of microorganisms.
Source
  1. Naturally occurring – These are naturally occurring compounds found in either plants or animals. Penicillin is a popular antibiotic that was first found and isolated from the fungus Penicillium. After this Prize-winning discovery by the scientist Alexander Fleming (Fleming 2001) in 1929, the world of antibiotic therapy paved way for the discovery of more such naturally occurring compounds. Plant-based alkaloids are another vast reservoir of such compounds (Kaefer 2011). The history and the evolution of Tetracyclines follow another such pattern (Nelson 2011).
  2. Semi-Synthetic – These are derivatives of naturally occurring compounds. Again, Penicillin is a classic example that has spawned numerous derivatives and generations of its original nature, ever since its discovery (PENICILLIN DERIVATIVE…). Another example of such antibiotics are the Macrolide class of antibiotics that are bacteriostatic antibiotics with a broad spectrum of activity against many gram-positive bacteria (Macrolide Antibiotics…). Development of resistance to them led to the search for the design of new semi-synthetic macrolide antibiotics (Fernandes 2017).
  3. Synthetic – These are purely synthesized using in the labs and are often inspired by naturally occurring compounds that possess similar properties; the difference being knowledge of the pathways unique to microbes are taken into cognizance to make them unique in their mode of action. This approach is believed to offer a new path for the exploitation and improvement of natural products to address the growing crisis in antibiotic resistance (Thaker 2015).
Range of activity
When it comes to action against bacterial growth, there are different layers of classification.
Gram staining – the activity is gauged whether they are against Gram-positive AND/OR Gram-negative bacteria ( based on their Gram staining nature – a type of staining procedure to determine the nature of their cell walls).
Spore-forming vs non-spore-forming – This is an important classification since certain pathogens form spores. As a result, their metabolism is different and requires different methods of arresting their growth.
Aerobic vs anaerobic – Based on the nature of the bacteria to grow in an oxygen-rich and deprived environment.
These are just some of the ways of classifying the range of action. Based on such layers of the classification there are either
  • Broad-spectrum OR
  • Narrow-spectrum antibacterial agents
Each spectrum class has its strengths and weaknesses.

Chemical Classes

There are different chemical classes of compounds that comprise the antibacterials and these includes:
  1. Beta Lactams
  2. Aminoglycosides
  3. Quinolones and Fluoroquinolones
  4. Streptogramins
  5. Sulfonamides
  6. Tetracyclines
  7. Nitroimidazoles
Cellular functions as targets
Antibacterial agents can also be classified based on the targets of action in the bacterial cells or other cells among other microbes. Since microbes vary from being prokaryotes to advanced eukaryotes the targets of action vary. Some of these includes:
  • Cell wall synthesis inhibitors
  • Membrane function inhibitors
  • Protein Synthesis inhibitors
  • Nucleic acid synthesis inhibitors
Antimicrobials
Antimicrobial is a broad term encompassing all agents that act against all types of microorganisms. The term antimicrobial is derived by combining three Greek words, ‘anti,’ which means ‘against, ‘mikros’ which means ‘little,’ and ‘bios,’ which means ‘life’.
Herein the agents are more than just antibiotics. They also include agents for use on external surfaces of objects of daily use. Coatings form an important category here (A Guide to Antimicrob…). The classes of antimicrobials includes:
          ●          Antibacterial against bacteria
          ●          Antifungal against fungi
          ●          Antiviral against virus
          ●          Antiparasitic against parasites
          ●          Antiprotozoal against protozoa
          ●          Broad-spectrum therapeutic deal with a wide range of microbes
          ●          Non-pharmaceutical antimicrobials are natural, and some non-medicinal chemical compounds to kill microbes include essential oils, organic acids, antimicrobial pesticides, antimicrobial metals, and alloys.
          ●          Antimicrobial scrubs that do not allow the growth of stains and odors on scrubs used for cleaning
          ●          Ozone destroys microbes in water, air, and process equipment.
          ●          Physical processes like Heat sterilization and Radiation are also used to create an antimicrobial effect. 
However, the main category of antimicrobials includes (Cloutier 2015):
          ●          Disinfectants that destroy numerous microbes on non-living surfaces to prevent the spread of infections and diseases
          ●          Antiseptics that are applied over living tissue to prevent infections
          ●          Antibiotics that protect against microbial attack inside the body
 
Antimicrobials can be microbicidal and biostatic. Microbicidal agents are those that destroy microbes, while Biostatic are the ones that stop their growth. 

Antibacterial and Antimicrobial Coatings

Antibacterial coatings are prepared using three main strategies of contact-killing, antibacterial agent release, and anti-adhesion or bacteria-repelling technology. The antibacterial coating technology is witnessing the growth of new possibilities of multi-functional, multi-release, and multi-approach coatings (Antimicrobial Coating…).
With the advent of numerous harmful microorganisms, some even unknown ones, the coating technology aims for a more versatile smart coating. Multiple new antimicrobial coating technologies are being explored to counter the attack of extremely contagious and harmful pathogens on various surfaces, including plastic, metals, glass, wood, fabric, medicinal implants, surgical equipment, commonly touched surfaces, etc.  
Antimicrobial coatings used cellular membrane permeability as the primary weapon against harmful pathogens. The coatings compositions include graphene materials (GMs), Graphene-like two-dimensional materials (2DMats), Polycationic hydrogel, polymers, and dendrimers. The latest nanotechnology, mostly silver nanoparticles, is proving its efficacy as a robust antimicrobial agent.
Today coatings technology is reaching new heights with new developments like smart coatings, self-cleaning coatings, oleophobic coatings, hydrophobic coatings, and numerous other novel coating technologies fulfilling the requirement of multiple surfaces exposed to varied exposure level in different settings.  
Apart from protection from harmful pathogens, antimicrobial coatings reduce maintenance costs while increasing the surface’s life span due to being anti-corrosive. With coatings, the need for harsh cleaning agents is drastically reduced while maintaining health and cleanliness standards. New coating technology also provides a finish to the surface while contributing to the infrastructure standard and conforming to health standards in all settings.
 

Conclusion

The terminologies define the scope of the antimicrobial nature of the compound or coating developed; whether it is the –cidal or –static nature of the compound or coating. These in turn help structured understanding and development of different chemistries to develop a variety of products to protect against emerging infections. A clear understanding of the difference between the two terms could help to manufacture better coatings conducive to application. A suitable antibacterial or antimicrobial technology application could lead to numerous advantages like lowering healthcare costs, labor costs, life-cycle cost, along with numerous other beneficial attributes.   

References

Atul Tiwari. Handbook of Antimicrobial Coatings. Elsevier, 2018. Link

Case Studies – Flora Coatings. Link

HC Neu, TD Gootz. Antimicrobial Chemotherapy. (1996).

J Loree, SL Lappin. Bacteriostatic Antibiotics. (2021).

GA Pankey, LD Sabath. Clinical relevance of bacteriostatic versus bactericidal mechanisms of action in the treatment of Gram-positive bacterial infections. Clin Infect Dis 38, 864-70 (2004).

A Fleming. On the antibacterial action of cultures of a penicillium, with special reference to their use in the isolation of B. influenzae. 1929. Bull World Health Organ 79, 780-90 (2001).

CM Kaefer, JA Milner. Herbs and Spices in Cancer Prevention and Treatment. (2011).

ML Nelson, SB Levy. The history of the tetracyclines. Ann N Y Acad Sci 1241, 17-32 (2011).

Penicillin Derivatives. Link

Macrolide Antibiotics. Birkhäuser Basel, 2002. Link

P Fernandes, E Martens, D Pereira. Nature nurtures the design of new semi-synthetic macrolide antibiotics. J Antibiot (Tokyo) 70, 527-533 (2017).

MN Thaker, GD Wright. Opportunities for synthetic biology in antibiotics: expanding glycopeptide chemical diversity. ACS Synth Biol 4, 195-206 (2015).

A Guide to Antimicrobial Coatings. Link

M Cloutier, D Mantovani, F Rosei. Antibacterial Coatings: Challenges, Perspectives, and Opportunities. Trends Biotechnol 33, 637-652 (2015).

Antimicrobial Coatings – IUPAC | International Union of Pure and Applied Chemistry. Link

NOTE: This article has been published at Elsevier’s Autherea:  Authorea Article Link

Read More
06 JanUPDATE

Thermal Stability of INVESIL Coatings

by Admin20 Comments

The thermogravimetric analysis (TGA) can be used to compare and demonstrate the thermal stability of the material in service. In a recent study, we have compared a solidified competing commercial antimicrobial coating in an inert atmosphere thermogravimetric analysis.

Read More
Lupin Leaf With Water Drops
01 JanPRODUCTSUPDATE

INVESIL – An Impervious Barrier to Biological Species

by Admin20 Comments

In a work accomplished with pre-painted panels top-coated with INVESIL it was demonstrated by the US NAVY research lab that chemicals equivalent to biologically active agents cannot penetrate through INVESIL coated surface.

Read More
25 DecPRODUCTSUPDATE

Global Demand for Antimicrobial Coatings in the Aviation Sector

by Admin20 Comments

A sudden COVID-19 crisis has significantly affected the air travel and created an awareness on protection from pathogens in public places. The rise of new pathogens and threat of possible future pandemic situations has further fueled the market of antimicrobial coatings in the aviation sector.

Read More
19 NovCORPORATEEVENT

Globally Patented – INVESIL Smart Coating

by Admin20 Comments

The INVESIL product is owned and globally Patented by Flora Coatings, Phoenix. Several patents and Trademark have been awarded to this technology. INVESIL is considered world’s first commercial broad spectrum antimicrobial coating..

Read More

“There are no secrets to success. It is the result of preparation, hard work, and learning failure.”

- Oliver Sandero
10 NovUPDATE

Application of Antimicrobial Coatings in Rideshare Industry

by Admin20 Comments

According to a survey conducted by IHS Markit,, about 25 percent of people did not want to use rideshare post-COVID-19. In comparison, 80 percent expect the rideshare vehicle to be equipped with decontaminators.

Read More
10 OctAnalysisBusiness

Mechanical Properties of INVESIL Coatings

by Admin20 Comments

Several companies are claiming that their coatings could last for months. However, no such data has been generated or proof available in support of their claims. Specially, if coating is less than 1 micron, it is difficult to believe those claims. We at Flora Coatings have compared a competitive commercial product with INVESIL. The commercial product was applied as received and tested using Taber Abrasion as per ASTM.

Read More
Mix Sweet Food
28 JulAnalysisNews

Effect of Nanosilver on Germs

by Admin20 Comments

Recent studies have identified the broad-spectrum antiviral properties of silver nanoparticles (AgNPs) against respiratory pathogens, such as adenovirus, parainfluenza, and influenza. AgNPs achieve this by attaching to viral glycoproteins, blocking entry into the host cell.

Read More
Car service worker applying nano coating on a car detail
10 JulAnalysisNews

INVESIL With Exceptionally Strong Adhesion Tendency

by Admin20 Comments

INVESIL was spray coated over silicone rubber gloves and displayed exceptionally good adhesion. Coated gloves after drying can be stretched as INVESIL is an adequately flexible.

Read More